Timken L163149 90055 Tapered Roller Bearing Full Assemblies

Bearing number:NA 4928; D:190 mm; da min.:148 mm; r min.:1,5 mm; Da max.:182 mm; Bore Diameter (mm):140; Basic static load rating (C0):580 kN; Brand:IKO; Fw:160 mm; Width (mm):50;

Max Grease Speed:2000; H1:125.0 mm; Locating Rings (width x OD):SR200X5.1; UPC Code:999999999; Seal Type:V-ring; Seal:VR222; Bearing:23222; A:175.00 mm; N1:32.00 mm; Housing:SNT 522-619;

T:73 mm; Brand:Gamet; G:11,11 mm; Size (mm):63.5x110x73; Outer Diameter (mm):110; J:114,76 mm; Width (mm):73; d:63,5 mm; R:2,5 mm; F:6,35 mm;

Limiting speed:3200 r/min; s1 max.:17.1 mm; d2:149 mm; Bore Diameter (mm):215; Da - max.:203 mm; Category:Bearings; Basic dynamic load rating - C:750 kN; D1 ≈:190 mm; Weight / Kilogram:11.52; Manufacturer Name:SKF;

C0 - Static Load:99000 lb; Dimension SVV:4.63 in; Dimension D Max:10.88 in; Grease Lubrication - B/C/O Seal:950 rpm; UPC Code:0883450173902; Engineering Group:Mounted Bearing; Weight:49.0 lb; Grease Lubrication - M/N Seal:1300 rpm; Pre Install Clearance Max:0.0055 in; Dimension RVV:0.57 in;

d:65 mm; (Grease) Lubrication Speed:5355 r/min; Basic static load rating (C0):19,60 kN; C:31 mm; Width (mm):31; Basic dynamic load rating (C):56,06 kN; D:120 mm; Weight:1,45 Kg; Brand:ISB; Bore Diameter (mm):65;

d1:285,1 mm; S:5,5 mm; Outer Diameter (mm):400; Bearing number:NJ244-E-MPA+HJ244-E; r2 min.:4 mm; Brand:NKE; r3 min.:4 mm; r4 min.:4 mm; Weight:42,3 Kg; F:268 mm;

Outer Diameter (mm):10; Width (mm):3; da min.:6,6 mm; d:6 mm; Basic static load rating (C0):0,196 kN; Brand:NTN; Size (mm):6x10x3; Bore Diameter (mm):6; B:3 mm; (Grease) Lubrication Speed:43 000 r/min;

Outer Diameter (mm):68; Bearing number:3/MJ28; Size (mm):28x68x18; Brand:NSK; C:18 mm; B:18 mm; d:28 mm; D:68 mm; Bore Diameter (mm):28; Width (mm):18;

C0r:168000 N / Static lo; Bore Diameter (mm):80; nG:6100 1/min / Limitin; Da max:129 mm; d:80 mm; Brand:FAG; nB:4250 1/min / Referen; Outer Diameter (mm):140; Width (mm):26; r1 min:2 mm;

R:152,4 mm; Bore Diameter (mm):76,2; Brand:Timken; H:142,9 mm; E:101,6 mm; Bearing number:30TPS106; r max:1,6 mm; d:76,2 mm; d1:77,79 mm; C:46,038 mm;

Width (mm):26; B:26 mm; Bore Diameter (mm):65; d:65 mm; Size (mm):65x100x26; D:100 mm; Outer Diameter (mm):100; C:26 mm; Brand:ISO; Bearing number:NU3013;

da:123 mm; SDM_:136.155; B:36,512 mm; D:165,1 mm; CONE:1.8; DA2:12.347; Db:159 mm; C:26,988 mm; (Oil) Lubrication Speed:2600 r/min; ALP22:38;

r - Cup Frontface To Clear Radius2:0.06 in; Da - Cup Frontface Backing Diameter:6.65 in; Cg - Geometry Factor8:0.107; Y1 - ISO Factor5:1.75; e - ISO Factor4:0.39; G1 - Heat Generation Factor (Roller-Raceway)7:227; Y2 - ISO Factor6:2.61; G2 - Heat Generation Factor (Rib-Roller End):38.2; Y - ISO Fact

d:60 mm; Da - Outer Ring Backing Diameter:80.200 mm; da - Inner Ring Backing Diameter:65.300 mm; R - Inner Ring To Clear Radius2:1.0 mm; Bearing Width:13 mm; Contact Angle:15 º; Ball Type:Ceramic; Limiting Speed (Grease):23040 rpm; do - Ball Diameter:7.143750 mm; Limiting Speed (Oil):46080 rpm;