Tapered Roller Bearing Cones

Contact Now

Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces.The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.

Timken 27690-20629 Tapered Roller Bearing Cones

Timken 27690-20629
1 pcs Negotiable

Timken 27687 INS Tapered Roller Bearing Cones

9/16 in No Hole
IRA-3 ANSI/ABMA 18.2,

Timken 29685-20629 Tapered Roller Bearing Cones

2-1/2 in Needle Roller Thrust
3-1/4 in 0.06 in

Timken 27684-20629 Tapered Roller Bearing Cones

80.7 In Stock
24mm Open Type

Timken 18790-20629 Tapered Roller Bearing Cones

7.7500 in Open
Steel TDO Assembly

Timken 13685-20629 Tapered Roller Bearing Cones

85.725 mm 149.225 mm
5 400 N·m

Timken M224749-20629 Tapered Roller Bearing Cones

0053893528403 8.7500 in
1.3750 in 6.0000 in

Timken 94700W Tapered Roller Bearing Cones

62 kN 6 mm
1.6 9 mm

Timken L860049 #3 Tapered Roller Bearing Cones

Open 1.3125 in
053893104515 2.6250 in

1.625 Inch | 41.275 Millimeter x 0 Inch | 0 Millimeter x 0.688 Inch | 17.475 Millimeter Timken 18590-3 Tapered Roller Bearing Cones

3/8-24 in 2.1250 in
10500 lbf .1200 lb

Timken 18200-30000 Tapered Roller Bearing Cones

Four-Bolt Flange Set Screw
2.1875 in Cast iron
1/13